Translucent Epoxy Potting Compound

Translucent Epoxy Potting Compound C-2147

C-2147 is transparent epoxy resin sealant, belongs to room temperature curing, with low mixing viscosity, easy to operate and so on.

Product Description

1. The product picture is as above

2. Product features and applications

This product is transparent epoxy resin sealant, belongs to room temperature curing, with low mixing viscosity, easy to operate and so on. After curing has good insulation, moisture-proof, waterproof performance, excellent mechanical strength, electrical characteristics. Mainly used for rectifier, electronic parts, electrolytic capacitors, high-voltage coil ignition coil, electronic components, led lighting, etc.

3. Main technical datas

Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.

4. How to Use

1) The A glue will be stratified phenomenon in storage, please first stir the period.

2) The A glue and B glue were weighed accurately according to the weight ratio of 2:1 and stirred evenly for 1-2 minutes.

3) The A glue /B glue mixture can be defoamed in a vacuum oven for 5 minutes (vacuum less than 1 mmHg).

4) Take the glue into the assembly components. Curing at room temperature.

5. Storage and Transportation

1) This product should be sealed and stored in a cool, dry and ventilated place (5 ° C ~ 25 ° C) to prevent rain and sun exposure.

2) The storage period of A glue and B glue at room temperature is 6 months respectively. After storage for a long time, the filler in the glue will settle. Please use it evenly after mixing, without affecting performance.

3) This product is non-dangerous, but pay attention to the use of the curing agent to avoid contact with the skin and eyes. Once contact, immediately wash with a proper amount of detergent and water, such as splashing into the eyes, wash with at least flowing water 15 minutes and consult a doctor.

4) After the product is opened, it should be used up as soon as possible. The unused products should be sealed and stored in a safe place.

5) This product is non-dangerous and can be stored and transported as general chemicals.

6) Due to the reaction mechanism factors, the electrical properties of the product should be tested after 72 hours.

6. Packing

This product is packed in plastic drum: Glue A is 5kg/pc, and glue B is 5kg/pc.

There are much more categories in our website, such as One-Component RTV Silicone Sealant, RTV silicone, Thermal Paste, thermal paste for cpu, Thermal Grease, thermal paste for cpu,Thermal Pad, best thermal pads, Epoxy Resin Adhesive. And there are more items are not showing on the website, please contact us directly for more information. 

WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323