Led Bulb Adhesive rtv silicone

Led Bulb Adhesive rtv silicone ST-378MT1

Product Description

1. The product picture is as above

2. Product features and applications

This product is a one-component, room temperature curing silicone rubber. It is de-alcoholized and cured. It emits less small alcohols during the process. It has no odor after complete curing and has excellent bonding properties. It has excellent high and low temperature resistance and has little change in performance from -50 °C to +200 °C. Mainly used for bonding, fixing and sealing of LED lighting and electronic components.

3. Main technical datas

(Non-standard value)

Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.

4. How to Use

1) Clean the surface: Clean the surface of the object to be glued or coated to remove rust, dust and oil, ect.

2) Apply glue: squeeze the product onto the cleaned surface to make it evenly distributed, and fix the bonded surface.

3) Curing: The sized parts are placed in the air to cure. The curing of this product is the process of curing from the outside to the inside, and the curing depth is 1-3mm at 24 hours (room temperature and 50% relative humidity). If the temperature is low and the humidity is low, the curing time will be prolonged.

4) After the operation is completed, the unused glue should be tightened immediately and sealed. When using it again, if there is a little crust at the seal, remove it and it will not affect the normal use.

5. Storage and Transportation

1) Keep away from children. If you accidentally touch the skin, wipe it clean and rinse with water; if you accidentally touch your eyes, rinse immediately with water and go to the hospital for examination.

2) This product should be sealed and stored in a cool, dry and ventilated place (5 ° C ~ 25 ° C) to prevent rain and sun exposure.

3) In a normal storage environment, the storage period is 6 months.

4) After the product is opened, it should be used up as soon as possible. The unused products should be sealed and placed in a safe place.

5) This product is non-dangerous and can be stored and transported as general chemicals.

6. Packing

This product is packed in 2600ml/plastic tube (4pcs/ctn), 300ml/plastic tube (24pcs/ctn), and 100ml/aluminum tube (100pcs/ctn).

Our products included  Thermal Paste, Thermal paste for cpu,Thermal Grease, conductive grease, Thermal Pad, best thermal pads, UV Curing Adhesive, UV glue, Potting Glue, Electrical potting compound, Epoxy Resin Adhesive, and other series, applications from lighting to new energy, automotive, electronics and other industries. The marketing service network covers all parts of the country and many countries in Southeast Asia.

WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323