Solvent-based adhesive ST-1630F
This product is mainly used in PP, PE, ABS, PVC, EVA, especially for organic glass, rubber, metal, bamboo, wood, fabric, etc.
Product Description
1. The product picture is as above
2. Product features and applications
This product is a transparent or light yellow liquid of special grafted copolymer compounds. It is mainly used in PP, PE, ABS, PVC, EVA, especially for organic glass, rubber, metal, bamboo, wood, fabric, etc. It is an ideal adhesive for home appliances, electronics, decoration, process toys, insulation materials, packaging and printing.
3. Main technical datas
| Item | Test Standard | Standard values |
| Model no. | / | ST-1630F |
| Appearance | Visual inspection | Transparent or light yellow liquid |
| Voscosity(mpa.s) | / | 8500-12000 |
| Surface curing time（min） | 25℃ | 2-5 |
| Density（g/ml） | GB/T533-2008 | 1.0 |
| Solid content | / | 50±5% |
| Stripping Strength (7d/N/25mm) | / | Canvas-canvas: 150N PVC-PVC: 15N Metal-PS foam body: tear |
(non-standard value)
Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.
4. How to Use
1)Bonding method: before use, clean the surface with removing water and remove the dust, oil dirt, rust, etc.
2)Coating: apply the glue directly on the surface of the adhesive, air about 10min. After the solvent is basically volatile (subject to the adhesive hand non-adhesive), directly adhere to the two surfaces, pressure to close contact, The use strength can be reached after placing 24h at room temperature. Two adhesive methods can be applied for fine porous materials.
3)Cover the bucket cover every time, otherwise it will dry, and the glue tool must be clean to avoid bringing impurities and affect the quality of the glue.
4)If needs to be diluted, it can be diluted with toluene or ethyl acetate. The use effect is better, and preferably rest overnight after the mixing bubble disappears.
5)Appliances can be washed with toluene, ethyl acetate or other organic solvents.
5. Storage and Transportation
1) Strictly against fire sources. During the large use of adhesives, the workplace maintains good
ventilation.
2)After the spray gun or the compressed barrel, you must reverse the glue or use it out. Do not stay in the pipe to avoid the retention time to affect the smooth spray brush.
3)Glue can splash on the skin, clean it with water, and rinse the eyes with a lot of water in time. If serious, seek medical treatment immediately. The glue must be stored in a cool and dry place at normal temperature. The recommended gum temperature is optimal at 20℃~30℃.
4)Keep away from children.
6. Packing
ST-1630F is packed adopts 15KG/ barrel of iron bucket, 1L/ tank (15 cans /ctn), 50ml/aluminum tube (500pcs/ctn).
There are much more categories in our website, such as Thermal Paste, thermal paste for cpu, Thermal Grease, thermal paste for cpu,Thermal Pad, best thermal pads, UV Curing Adhesive, UV glue, Potting Glue, Electrical potting compound, Epoxy Resin Adhesive. And there are more items are not showing on the website, please contact us directly for more information.
WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323
Contact Now
