UV Curing Adhesive Other Material Bonding

UV Curing Adhesive Other Material Bonding ST-232D

Product Description

1. The product picture is as above

2. Product features and applications

This product is a single component, ultraviolet curing, acrylic resin adhesive. Designed specifically for plastic (PS,PVC,PC,PMMA, etc.) bonding, the product also has certain adhesion to glass, metal, etc. mainly used for led lighting, electronics, plastic and other bonding. It has the characteristics of dry energy, fast curing, strong adhesion, good water resistance, high and low temperature resistance and so on.

3. Main technical datas

Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.

4. How to Use

1) The adhesive surface shall be dusted, deoiled, dried and determined according to the need.

2) UV irradiation time is adjusted according to the power of the uv lamp and the distance between the coated parts. The curing speed and depth depend on the light intensity, the spectral distribution of the light source, the irradiation time and the transmittance of the adhesive material.

5. Storage and Transportation

1) Store in a cool, dark place, the best storage temperature is 8-28℃, too high or too low will affect the properties of glue, shelf life of 6 months.

2) After the operation is finished, the unused glue should tighten the cap immediately, seal and save.

3) In order to avoid contamination of the original glue, do not return the poured glue back to the original packaging.

4) General adhesive uv has slight irritation to skin and eyes. If accidentally splashed into the eyes, should be immediately cleaned with water, if there is still discomfort to the hospital examination. Rinse immediately after skin contact with soapy water.

6. Packing

This product is packed in plastic bottle with 250g/pc, and in plastic tube with 50g/pc

There are much more categories in our website, such as One-Component RTV Silicone Sealant, RTV silicone, Thermal Paste, thermal paste for cpu, Thermal Grease, thermal paste for cpu,Thermal Pad, best thermal pads, Potting Glue, Electrical potting compound, Epoxy Resin Adhesive. And there are more items are not showing on the website, please contact us directly for more information.

WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323